Home Forums HDP on Linux – Installation Error during HMC install: Puppet agent ping failed

This topic contains 19 replies, has 5 voices, and was last updated by  Larry Liu 1 year, 8 months ago.

  • Creator
    Topic
  • #13136

    Trang Nguyen
    Member

    Hi, I am running into puppet connectivity issues. I found the check.sh script and ran it and got the following results:
    System check results:
    Mon Dec 31 21:39:20 EST 2012
    Cluster name: SmsHadoopCluster SmsHadoopCluster SmsHadoopCluster SmsHadoopCluster SmsHadoopCluster SmsHadoopCluster
    Total number of nodes: 6
    HMC nodename: xdc-tst-mapre-001.openmarket.com xdc-tst-mapre-004.openmarket.com xdc-tst-mapre-006.openmarket.com xdc-tst-mapre-003.openmarket.com xdc-tst-mapre-002.openmarket.com xdc-tst-mapre-005.openmarket.com
    HMC node IP address: 10.9.197.66 10.9.197.69 10.9.197.71 10.9.197.68 10.9.197.67 10.9.197.70

    =========== Node xdc-tst-mapre-001.openmarket.com ===========
    1. Hosts table
    # Managed by Puppet
    127.0.0.1 localhost.localdomain localhost
    ::1 localhost6.localdomain6 localhost6
    10.9.197.66 xdc-tst-mapre-001.openmarket.com xdc-tst-mapre-001
    # Edit /etc/hosts.local to add content below

    2. Full host name
    xdc-tst-mapre-001.openmarket.com

    3. Kernel and architecture
    Linux xdc-tst-mapre-001.openmarket.com 2.6.32-279.14.1.el6.x86_64 #1 SMP Tue Nov 6 23:43:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

    4. OS version
    CentOS release 6.3 (Final)
    Kernel \r on an \m

    5. Running networks
    eth0 Link encap:Ethernet HWaddr 00:F4:09:63:44:01
    inet addr:10.9.197.66 Bcast:10.9.197.255 Mask:255.255.255.0
    inet6 addr: fe80::2f4:9ff:fe63:4401/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:3745719 errors:0 dropped:0 overruns:0 frame:0
    TX packets:1903923 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:2854653170 (2.6 GiB) TX bytes:3664329356 (3.4 GiB)

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:1046999 errors:0 dropped:0 overruns:0 frame:0
    TX packets:1046999 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:5809502992 (5.4 GiB) TX bytes:5809502992 (5.4 GiB)

    6. Firewall
    iptables: Firewall is not running.

    7. SELINUX
    SELinux status: disabled

    8. NTP
    ntpd (pid 4264) is running…

    9. Name resolution
    Server: 10.55.210.147
    Address: 10.55.210.147#53

    Name: xdc-tst-mapre-001.openmarket.com
    Address: 10.9.197.66

    10. Repositories list
    CentOS6-XDC.repo
    epel.repo
    epel-testing.repo
    hdp.repo

    11. Partitions and mount-points
    Filesystem 1K-blocks Used Available Use% Mounted on
    /dev/mapper/VolGroup00-LogVol00
    126822188 2718496 117661504 3% /
    tmpfs 8166320 0 8166320 0% /dev/shm
    /dev/vda1 198337 58532 129565 32% /boot

    12. Puppet failures

    =========== End node xdc-tst-mapre-001.openmarket.com ===========

    Could you please advise?
    Thanks,
    Trang

Viewing 19 replies - 1 through 19 (of 19 total)

You must be logged in to reply to this topic.

  • Author
    Replies
  • #13184

    Larry Liu
    Moderator

    Hi, Trang

    Thanks for letting us know.

    Please let us know if you have any further questions.

    Have a great 2013.

    Thanks

    Larry

    Collapse
    #13180

    Trang Nguyen
    Member

    I’ve found that the puppet related issues were due to an error in the /etc/hosts file so this thread can be closed.

    Thanks,
    Trang

    Collapse
    #13177

    Trang Nguyen
    Member

    Unfortunately it hangs in the first step (cluster install) on:
    [2013:01:03 02:39:04][INFO][Cluster:SmsTestCluster][Cluster.php:794][installService]: Installing service MISCELLANEOUS complete.
    [2013:01:03 02:39:04][INFO][PuppetInvoker][PuppetInvoker.php:277][genKickWait]: rm -f /etc/puppet/master/modules/catalog/files/modules.tgz
    [2013:01:03 02:39:04][INFO][PuppetInvoker][PuppetInvoker.php:280][genKickWait]: tar zcf /etc/puppet/master/manifestloader/modules.tgz /etc/puppet/master/modules
    [2013:01:03 02:39:04][INFO][PuppetInvoker][PuppetInvoker.php:283][genKickWait]: mv /etc/puppet/master/manifestloader/modules.tgz /etc/puppet/master/modules/catalog/files
    [2013:01:03 02:39:04][INFO][PuppetInvoker][PuppetInvoker.php:292][genKickWait]: Kick attempt (1/3)
    [2013:01:03 02:39:04][INFO][PuppetInvoker][PuppetInvoker.php:332][waitForResults]: Waiting for results from xdc-tst-mapre-001.openmarket.com,xdc-tst-mapre-004.openmarket.com,xdc-tst-mapre-006.openmarket.com,xdc-tst-mapre-003.openmarket.com,xdc-tst-mapre-002.openmarket.com,xdc-tst-mapre-005.openmarket.com
    [2013:01:03 02:39:04][INFO][PuppetInvoker][PuppetInvoker.php:336][waitForResults]: 0 out of 6 nodes have reported for txn 3-2-0
    [2013:01:03 02:39:09][INFO][PuppetInvoker][PuppetInvoker.php:336][waitForResults]: 0 out of 6 nodes have reported for txn 3-2-0
    [2013:01:03 02:39:14][INFO][PuppetInvoker][PuppetInvoker.php:336][waitForResults]: 0 out of 6 nodes have reported for txn 3-2-0
    [2013:01:03 02:39:19][INFO][PuppetInvoker][PuppetInvoker.php:336][waitForResults]: 0 out of 6 nodes have reported for txn 3-2-0

    Nothing new is written to the puppet_apply_logs on the HMC node. The last log entries were:

    [root@xdc-tst-mapre-001 log]# tail -f /var/log/puppet_apply.log
    Wed Jan 02 21:40:03 -0500 2013 Hdp-ganglia::Config::Generate_monitor[HDPNameNode] (debug): The container Class[Hdp-ganglia::Monitor::Config-gen] will propagate my refresh event
    Wed Jan 02 21:40:03 -0500 2013 Class[Hdp-ganglia::Monitor::Config-gen] (debug): The container Stage[5] will propagate my refresh event
    Wed Jan 02 21:40:03 -0500 2013 Puppet (debug): Finishing transaction 70105879371620
    Wed Jan 02 21:40:03 -0500 2013 Puppet (debug): Storing state
    Wed Jan 02 21:40:03 -0500 2013 Puppet (info): Creating state file /var/lib/puppet/state/state.yaml
    Wed Jan 02 21:40:03 -0500 2013 Puppet (debug): Stored state in 0.14 seconds
    Wed Jan 02 21:40:03 -0500 2013 Puppet (notice): Finished catalog run in 48.93 seconds
    Wed Jan 02 21:40:03 -0500 2013 Puppet (debug): Finishing transaction 70105879099380
    Wed Jan 02 21:40:03 -0500 2013 Puppet (debug): Received report to process from xdc-tst-mapre-001.openmarket.com
    Wed Jan 02 21:40:03 -0500 2013 Puppet (debug): Processing report from xdc-tst-mapre-001.openmarket.com with processor Puppet::Reports::Store

    I haven’t done a single node install. Any ideas on what else I could check before I try a single node install?

    Thanks,
    Trang

    Collapse
    #13162

    Robert
    Participant

    Hi Trang,
    I believe the mount issue you experienced and resolved is mentioned here http://hortonworks.com/community/forums/topic/cant-find-custom-mount-points-during-deployment-hdp/

    As far as the current issue you are getting now, the logs doesn’t seem to say much. Within your HMC page, where does it fail? (i.e HDFS start, MapReduce start..etc) You can try logging into the machines:
    xdc-tst-mapre-001.openmarket.com,xdc-tst-mapre-004.openmarket.com,xdc-tst-mapre-006.openmarket.com,xdc-tst-mapre-003.openmarket.com,xdc-tst-mapre-005.openmarket.com,xdc-tst-mapre-002.openmarket.com

    and look at /var/log/puppet_apply.log and see what it was trying to execute and if it failed or not. Also, just to remove variables out of the equation, have you tried just setting up a single node?

    Regards,
    Robert

    Collapse
    #13160

    Trang Nguyen
    Member

    I tried to uninstall the cluster but when that failed, I ended up erasing puppet, hmc and retrying again.
    This time, I changed the cluster installation directory to a custom directory (it originally used the default mount volume for root and I think that caused some issue).

    Anyone, the install now hangs at the step in which it waits for services to start up:
    [2013:01:02 23:25:27][INFO][Service: MISCELLANEOUS (SmsHadoopCluster)][Service.php:130][setState]: MISCELLANEOUS – INSTALLED dryRun=
    [2013:01:02 23:25:27][INFO][Cluster:SmsHadoopCluster][Cluster.php:794][installService]: Installing service MISCELLANEOUS complete.
    [2013:01:02 23:25:27][INFO][PuppetInvoker][PuppetInvoker.php:277][genKickWait]: rm -f /etc/puppet/master/modules/catalog/files/modules.tgz
    [2013:01:02 23:25:27][INFO][PuppetInvoker][PuppetInvoker.php:280][genKickWait]: tar zcf /etc/puppet/master/manifestloader/modules.tgz /etc/puppet/master/modules
    [2013:01:02 23:25:27][INFO][PuppetInvoker][PuppetInvoker.php:283][genKickWait]: mv /etc/puppet/master/manifestloader/modules.tgz /etc/puppet/master/modules/catalog/files
    [2013:01:02 23:25:27][INFO][PuppetInvoker][PuppetInvoker.php:292][genKickWait]: Kick attempt (1/3)
    [2013:01:02 23:25:28][INFO][PuppetInvoker][PuppetInvoker.php:97][sendKick]: xdc-tst-mapre-002.openmarket.comprevious kick still running, will continue to wait
    [2013:01:02 23:25:28][INFO][PuppetInvoker][PuppetInvoker.php:332][waitForResults]: Waiting for results from xdc-tst-mapre-001.openmarket.com,xdc-tst-mapre-004.openmarket.com,xdc-tst-mapre-006.openmarket.com,xdc-tst-mapre-003.openmarket.com,xdc-tst-mapre-005.openmarket.com,xdc-tst-mapre-002.openmarket.com
    [2013:01:02 23:25:28][INFO][PuppetInvoker][PuppetInvoker.php:336][waitForResults]: 0 out of 6 nodes have reported for txn 3-2-0
    [2013:01:02 23:25:33][INFO][PuppetInvoker][PuppetInvoker.php:336][waitForResults]: 0 out of 6 nodes have reported for txn 3-2-0
    [2013:01:02 23:25:38][INFO][PuppetInvoker][PuppetInvoker.php:336][waitForResults]: 0 out of 6 nodes have reported for txn 3-2-0
    [2013:01:02 23:25:43][INFO][PuppetInvoker][PuppetInvoker.php:336][waitForResults]: 0 out of 6 nodes have reported for txn 3-2-0
    [2013:01:02 23:25:48][INFO][PuppetInvoker][PuppetInvoker.php:336][waitForResults]: 0 out of 6 nodes have reported for txn 3-2-0
    [2013:01:02 23:25:53][INFO][PuppetInvoker][PuppetInvoker.php:336][waitForResults]: 0 out of 6 nodes have reported for txn 3-2-0

    Collapse
    #13159

    Trang Nguyen
    Member

    Here is a snippet of when it starts to fail:
    [2013:01:02 22:30:36][INFO][SuggestProperties][suggestProperties.php:306][suggestProperties]: Calculated Config Parameters
    Array
    (
    [result] => 0
    [error] =>
    [configs] => Array
    (
    [mapred_map_tasks_max] => 6
    [mapred_red_tasks_max] => 2
    [namenode_heapsize] => 4784
    [jtnode_heapsize] => 2864
    [hbase_master_heapsize] => 688
    [dtnode_heapsize] => 1144
    [hadoop_heapsize] => 1144
    [mapred_child_java_opts_sz] => 1024
    [hbase_regionserver_heapsize] => 1144
    [jdk_location] => http://xdc-tst-mapre-001.openmarket.com/downloads
    )

    )

    [2013:01:02 22:30:36][INFO][ClusterState][clusterState.php:40][updateClusterState]: Update Cluster State with {“state”:”CONFIGURATION_IN_PROGRESS”,”displayName”:”Configuration in progress”,”timeStamp”:1357165836,”context”:{“stage”:”CONFIGURE_SERVICES”}}
    [2013:01:02 22:31:11][INFO][HMC][HMC.php:476][internalTrigger]: HMC triggering action=deployHDP, Deploying cluster
    [2013:01:02 22:31:11][INFO][HMCTxnUtils][HMCTxnUtils.php:103][execBackgroundProcess]: Trying to background a new process, cluster=SmsHadoopCluster, txnId=23, command=/usr/bin/php /usr/share/hmc//php/orchestrator/ClusterMain.php, args= -c SmsHadoopCluster -d /var/db/hmc/data/data.db -a deploy -x 23, logFile=/var/log/hmc/hmc.txn.23.log, execCommand=/usr/bin/php /usr/share/hmc//php/util/BackgroundExecutor.php -t “23″ -c “/usr/bin/php /usr/share/hmc//php/orchestrator/ClusterMain.php” -a ” -c SmsHadoopCluster -d /var/db/hmc/data/data.db -a deploy -x 23″ -l “/var/log/hmc/hmc.txn.23.log”
    [2013:01:02 22:31:11][INFO][HMCTxnUtils][HMCTxnUtils.php:127][execBackgroundProcess]: Output from process, command=/usr/bin/php /usr/share/hmc//php/orchestrator/ClusterMain.php, txnId=23, output=Executing /usr/bin/php /usr/share/hmc//php/orchestrator/ClusterMain.php -c SmsHadoopCluster -d /var/db/hmc/data/data.db -a deploy -x 23 > /var/log/hmc/hmc.txn.23.log 2>&1
    Background Child Process PID:15551
    Done with parent

    [2013:01:02 22:31:11][INFO][HMCTxnUtils][HMCTxnUtils.php:137][execBackgroundProcess]: Found child pid, command=/usr/bin/php /usr/share/hmc//php/orchestrator/ClusterMain.php, txnId=23, output=Executing /usr/bin/php /usr/share/hmc//php/orchestrator/ClusterMain.php -c SmsHadoopCluster -d /var/db/hmc/data/data.db -a deploy -x 23 > /var/log/hmc/hmc.txn.23.log 2>&1
    Background Child Process PID:15551
    Done with parent
    , pid=15551
    [2013:01:02 22:31:11][INFO][ClusterState][clusterState.php:40][updateClusterState]: Update Cluster State with {“state”:”DEPLOYMENT_IN_PROGRESS”,”displayName”:”Deployment in progress”,”timeStamp”:1357165871,”context”:{“txnId”:23}}
    [2013:01:02 22:31:11][INFO][ClusterMain:TxnId=23][ClusterMain.php:322][]: Taking action=deploy on cluster=SmsHadoopCluster, txn=23-0-0
    [2013:01:02 22:31:11][ERROR][OrchestratorDB][OrchestratorDB.php:127][getClusterServices]: Found service with invalid

    Collapse
    #13158

    Trang Nguyen
    Member

    Unfortunately cluster installation failed. Is there a way for me to get the deployment logs to you?

    Thanks,

    Trang

    Collapse
    #13157

    Sasha J
    Moderator

    Hi Trang,

    Glad to hear that you got past the issue. Does this mean that you have now successfully installed HDP?

    Thanks,
    Ted.

    Collapse
    #13156

    Trang Nguyen
    Member

    Hi Ted,

    It looks like we were able to get around the issue by:

    1. add entries to /etc/hosts (uncertain if this was needed since the hosts are resolvable via DNS)
    2. uninstalling puppet on the agent nodes
    3. manually installing puppet on the agent nodes
    4. manually requesting certs from each of the client nodes

    Thanks,
    Trang

    Collapse
    #13155

    Sasha J
    Moderator

    Hi Trang,

    I just thought of something that may be a point of confusion here, the file I’m talking about is not the file that you point the hmc installer at, but is the file in /etc called ‘hosts’ and this file needs to be the same across all machines on your cluster.

    Thanks,
    Ted.

    Collapse
    #13154

    Trang Nguyen
    Member

    Hi Ted, I didn’t use ip addreses because boxes are internal and the hostnames are all resolvable.
    However, it appears that perhaps the puppet master is not configured properly by the installer.

    We see this error: err: Could not request certificate: Error 400 on SERVER: this master is not a CA

    Is there something we should look for when checking the puppet configs on the master node?

    Trang

    Collapse
    #13153

    Sasha J
    Moderator

    Hi Trang,

    Yes, you only need to set up passwordless ssh from the main node to the remaining nodes. Though sometimes troubleshooting failures becomes easier if it is setup for the other way around as well. Another question, in your /etc/hosts file is there an ip address for each of the hosts? I just noticed that when you told me the contents of the host file you only listed the hostnames, and if there isn’t an ip address listed in there for these hosts they won’t be able to be connected to.

    Thanks,
    Ted.

    Collapse
    #13149

    Trang Nguyen
    Member

    Hi Ted,
    Yes that was setup. The install process proceeds fine except in the in the finalize step, when I get the puppet error:
    [PuppetFinalize:txnId=1:subTxnId=104][finalizeNodes.php:225][sign_and_verify_agent]: Failed to ping puppet agent on host [xdc-tst-mapre-002.openmarket.com]

    Ssh passwordless key access for root on only needs to be setup from the HMC node to the remaining nodes and not vice versa right?

    Trang

    Collapse
    #13148

    tedr
    Member

    Hi Trang,

    Have you set up passwordless ssh form the main host to all of the other hosts?

    Thanks,
    Ted.

    Collapse
    #13146

    Trang Nguyen
    Member

    This is also the response I get why I try to run a puppet test from one of the other (non-HMC) nodes:
    puppet agent –server xdc-tst-mapre-001.openmarket.com –test
    warning: peer certificate won’t be verified in this SSL session
    warning: peer certificate won’t be verified in this SSL session
    warning: peer certificate won’t be verified in this SSL session
    Exiting; no certificate found and waitforcert is disabled

    Collapse
    #13145

    Trang Nguyen
    Member

    Hi Ted,
    These are the contents of my hostfile:
    xdc-tst-mapre-001.openmarket.com
    xdc-tst-mapre-002.openmarket.com
    xdc-tst-mapre-003.openmarket.com
    xdc-tst-mapre-004.openmarket.com
    xdc-tst-mapre-005.openmarket.com
    xdc-tst-mapre-006.openmarket.com

    Thanks,
    Trang

    Collapse
    #13144

    tedr
    Member

    Hi Trang,

    I’m looking through the logs you posted to see if I can find a hint as to why it’s not working. The only hint I’ve found so far is that it looks like your hosts file does not have a reference to the other machines in the cluster.

    Thanks,
    Ted.

    Collapse
    #13138

    Trang Nguyen
    Member

    HMC failures
    [2012:12:31 22:08:42][INFO][BootStrap][bootstrap.php:178][]: Fetching gpg key for HDP-1.1.1.16 from location http://public-repo-1.hortonworks.com/HDP-1.1.1.16/repos/centos6/RPM-GPG-KEY/RPM-GPG-KEY-Jenkins using curl –connect-timeout 30 –fail -s -o /tmp/hmcDownloads-1356991722//RPM-GPG-KEY-Jenkins http://public-repo-1.hortonworks.com/HDP-1.1.1.16/repos/centos6/RPM-GPG-KEY/RPM-GPG-KEY-Jenkins
    [2012:12:31 22:08:42][INFO][BootStrap][bootstrap.php:178][]: Fetching gpg key for HDP-UTILS-1.1.0.15 from location http://public-repo-1.hortonworks.com/HDP-1.1.1.16/repos/centos6/RPM-GPG-KEY/RPM-GPG-KEY-Jenkins using curl –connect-timeout 30 –fail -s -o /tmp/hmcDownloads-1356991722//RPM-GPG-KEY-Jenkins http://public-repo-1.hortonworks.com/HDP-1.1.1.16/repos/centos6/RPM-GPG-KEY/RPM-GPG-KEY-Jenkins
    [2012:12:31 22:09:39][INFO][PuppetFinalize:txnId=1:subTxnId=104][finalizeNodes.php:177][sign_and_verify_agent]: Puppet cert sign status, totalHosts=1, succeededHostsCount=0, failedHostsCount=1
    [2012:12:31 22:09:44][INFO][PuppetFinalize:txnId=1:subTxnId=104][finalizeNodes.php:256][sign_and_verify_agent]: Puppet agent ping status, totalHosts=1, succeededHostsCount=1, failedHostsCount=0
    [2012:12:31 22:09:44][INFO][PuppetFinalize:txnId=1:subTxnId=104][finalizeNodes.php:390][]: Puppet finalize, succeeded for 1 and failed for 0 of total 1 hosts
    [2012:12:31 22:19:03][INFO][BootStrap][bootstrap.php:178][]: Fetching gpg key for HDP-1.1.1.16 from location http://public-repo-1.hortonworks.com/HDP-1.1.1.16/repos/centos6/RPM-GPG-KEY/RPM-GPG-KEY-Jenkins using curl –connect-timeout 30 –fail -s -o /tmp/hmcDownloads-1356992343//RPM-GPG-KEY-Jenkins http://public-repo-1.hortonworks.com/HDP-1.1.1.16/repos/centos6/RPM-GPG-KEY/RPM-GPG-KEY-Jenkins
    [2012:12:31 22:19:04][INFO][BootStrap][bootstrap.php:178][]: Fetching gpg key for HDP-UTILS-1.1.0.15 from location http://public-repo-1.hortonworks.com/HDP-1.1.1.16/repos/centos6/RPM-GPG-KEY/RPM-GPG-KEY-Jenkins using curl –connect-timeout 30 –fail -s -o /tmp/hmcDownloads-1356992343//RPM-GPG-KEY-Jenkins http://public-repo-1.hortonworks.com/HDP-1.1.1.16/repos/centos6/RPM-GPG-KEY/RPM-GPG-KEY-Jenkins
    [2012:12:31 22:19:26][INFO][PuppetFinalize:txnId=3:subTxnId=104][finalizeNodes.php:177][sign_and_verify_agent]: Puppet cert sign status, totalHosts=6, succeededHostsCount=6, failedHostsCount=0
    [2012:12:31 22:19:37][INFO][PuppetFinalize:txnId=3:subTxnId=104][finalizeNodes.php:256][sign_and_verify_agent]: Puppet agent ping status, totalHosts=6, succeededHostsCount=1, failedHostsCount=5
    [badHealthReason] => Puppet agent ping failed: , error=111, outputLogs=Puppet agent ping failed: [Connection refused]
    [badHealthReason] => Puppet agent ping failed: , error=111, outputLogs=Puppet agent ping failed: [Connection refused]
    [badHealthReason] => Puppet agent ping failed: , error=111, outputLogs=Puppet agent ping failed: [Connection refused]
    [badHealthReason] => Puppet agent ping failed: , error=11

    Collapse
    #13137

    Trang Nguyen
    Member

    There are 6 nodes. Here are the results for two of the nodes:
    =========== Node xdc-tst-mapre-004.openmarket.com ===========
    1. Hosts table
    # Managed by Puppet
    127.0.0.1 localhost.localdomain localhost
    ::1 localhost6.localdomain6 localhost6
    10.9.197.69 xdc-tst-mapre-004.openmarket.com xdc-tst-mapre-004
    # Edit /etc/hosts.local to add content below

    2. Full host name
    xdc-tst-mapre-004.openmarket.com

    3. Kernel and architecture
    Linux xdc-tst-mapre-004.openmarket.com 2.6.32-279.14.1.el6.x86_64 #1 SMP Tue Nov 6 23:43:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

    4. OS version
    CentOS release 6.3 (Final)
    Kernel \r on an \m

    5. Running networks
    eth0 Link encap:Ethernet HWaddr 00:F4:09:63:44:04
    inet addr:10.9.197.69 Bcast:10.9.197.255 Mask:255.255.255.0
    inet6 addr: fe80::2f4:9ff:fe63:4404/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:31436 errors:0 dropped:0 overruns:0 frame:0
    TX packets:30798 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:10320034 (9.8 MiB) TX bytes:4239716 (4.0 MiB)

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:12 errors:0 dropped:0 overruns:0 frame:0
    TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:840 (840.0 b) TX bytes:840 (840.0 b)

    6. Firewall
    iptables: Firewall is not running.

    7. SELINUX
    SELinux status: disabled

    8. NTP
    ntpd (pid 4279) is running…

    9. Name resolution
    Server: 10.55.210.147
    Address: 10.55.210.147#53

    Name: xdc-tst-mapre-001.openmarket.com
    Address: 10.9.197.66

    10. Repositories list
    CentOS6-XDC.repo
    hdp.repo

    11. Partitions and mount-points
    Filesystem 1K-blocks Used Available Use% Mounted on
    /dev/mapper/VolGroup00-LogVol00
    126822188 1935952 118444048 2% /
    tmpfs 1961420 0 1961420 0% /dev/shm
    /dev/vda1 198337 58526 129571 32% /boot

    12. Puppet failures

    =========== End node xdc-tst-mapre-004.openmarket.com ===========

    ========== Node xdc-tst-mapre-003.openmarket.com ===========
    1. Hosts table
    # Managed by Puppet
    127.0.0.1 localhost.localdomain localhost
    ::1 localhost6.localdomain6 localhost6
    10.9.197.68 xdc-tst-mapre-003.openmarket.com xdc-tst-mapre-003
    # Edit /etc/hosts.local to add content below

    2. Full host name
    xdc-tst-mapre-003.openmarket.com

    3. Kernel and architecture
    Linux xdc-tst-mapre-003.openmarket.com 2.6.32-279.14.1.el6.x86_64 #1 SMP Tue Nov 6 23:43:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

    4. OS version
    CentOS release 6.3 (Final)
    Kernel \r on an \m

    5. Running networks
    eth0 Link encap:Ethernet HWaddr 00:F4:09:63:44:03
    inet addr:10.9.197.68 Bcast:10.9.197.255 Mask:255.255.255.0

    Collapse
Viewing 19 replies - 1 through 19 (of 19 total)